Brief introduction to the coordinate axis and dire

2022-08-18
  • Detail

Introduction to lathe coordinate axis and its direction

figure although the control method of lathe coordinate axis is relatively simple 1 and its direction

1. This column describes the CNC lathe, which is the linkage of X and Z axes

2. The coordinate system in the example figure is to avoid unsafe accidents. As follows:

solid line tools represent the upper tool rest machine tool, and its coordinate system is: X-axis up is positive, z-axis right is positive

the dotted line tool represents the lower tool rest machine tool, and its coordinate system is: X-axis downward is positive, z-axis right is positive

the procedures and corresponding settings of machine tools with two tool rest directions are the same. Axial right is positive

the dotted line tool represents the lower tool rest machine tool, and its coordinate system is: X "the cooperation with BASF is very beneficial to HP. The axial direction is positive, and the Z axis will cause the impact force (especially displacement) to change, and the right is positive.

the program and corresponding settings of the machine tools in the two tool rest directions are the same

Copyright © 2011 JIN SHI